If none of these materials is available to you you can always elect loud toilet to soak rags or towels in hot water and wrap them around the frozen pipe. This will probably take longer than any of the methods previously mentioned.
With a putty knife, carefully scrape the remaining parts of the wax ring from the area. Clean the spot so that the new wax ring will be level. Place a new wax ring on the opening and replace the toilet. Bolt it back onto the floor, reconnect the water line repair supply tube and watch for leaks as the water is turned back on.
This so impressed me, that I thought, here is the man who might fix my sink problem, and I told him about my kitchen sink. The look on his face was priceless, as he said, "Ridiculous! Sinks don't leak if they're new." He even showed me what to do. He took out a big heavy-duty screwdriver with a big flat-head blade and showed me. "This is what's probably lose." He put the blade of the screwdriver in a notch the size of a giant screw head that was right in the center of the drain basket where the plug sat in.
3) Call the first one you see and give them the job. It is okay to ask plumbers for an initial estimate. If you live in a large, urban area chances are you will have many choices. Don't feel as though you need to hire the first person you contact. Get the information you need, then comparison shop. Check websites and social media accounts to get a feel for how everybody stacks up. Then make the final call.
A broken water supply line can cause water to spurt from the line connecting the toilet to the main water valve. The first step to repair this leak is to shut off the water line repair supply valve. This will stop the flow of water to the toilet. Next, flush the toilet to remove the water from the bowl and hold down the handle until it is completely empty.
When doing the install on a water heater, keep an eye out for unconnected pipes. A commonly missed pipe is the one that leads out from the area for drainage. It is probably a recirculation pipe; that helps your water remain heated without wasting too much water.
Is your garbage disposal clogged, but it is turning ok? This may be due to a blockage in the pipe. If you look at the pipe work under your sink you will see that the disposal is connected to a pipe that should join to a U bend and providing it was installed correctly it should have a connector that can be undone. If you undo this connector the pipe will pull away and generally this is where most blockages occur. Remove the blockage and reconnect the pipe.